Product Description
Fowler Sylvac Hi-Cal Electronic Height Gage FlashCable® Gage Interface
Sends data to our GageMux® or similar devices
Through the use of the Advanced Systems and Designs - ASDQMS FlashCable® gage interface and GageMux® USB, the RS-232 serial port on the Fowler Sylvac 54-931-300 Height Gage allows two-way communication between an external computer and the Hi-Cal 150 | 300 Electronic Height Gage.
The ASDQMS FlashCable® gage interface is engineered to change the output on the Fowler Sylvac Hi-Cal Electronic Height Gage to an output in Digimatic format. The male connector on the Advanced Systems & Designs FlashCable® gage interface connects directly to the 9-pin female connector on the Folwer Sylvac Hi-Cal Electronic Height Gage.
This FlashCable® Digimatic gage interface is designed to work with our GageMux® or other similar devices that recognize the Mitutoyo Digimatic signal. When connected to the GageMux®, the input port provides the power to the FlashCable® gage interface. When using devices other than the GageMux® please insure that pin 9 of the 10-pin connector provides a 5v DC supply to the FlashCable® gage interface.
The LED on the FlashCable® gage interface turns GREEN when it is connected properly. The LED turns RED when the data is being sent or a data request is requested.
The data transfer can be triggered using any of the following methods:
-
Using the FCT button on the Fowler Sylvac Hi-Cal height Gage
-
Using the Fowler Foot Pedal on the Electronic Height Gage
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices
-
Sending a gage read command from the computer to the GageMux USB.
A detailed operation manual is included with this ASDQMS FlashCable® gage interface. The FlashCable® gage interface is normally set to the to the default settings on the Hi-Cal Electronic Height Gage. Both the Fowler Sylvac Hi-Cal Electronic Height Gage and FlashCable® gage interface must be set to same values. Refer to the Fowler Sylvac Hi-Cal 150 | 300 Electronic Height Gage operation manual for more information on RS232 serial communication.
This Advanced Systems & Designs FlashCable® gage interface has a lifetime warranty against manufacturing defects. Six foot standard length with special lengths available upon request.
Details:
-
ASDQMS Digimatic output FlashCable® for Fowler Sylvac 54-931-300 Hi-Cal Electronic Height Gage
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special FlashCable® gage interface cable lengths are available on request
-
Lifetime warranty against manufacturing defects
