Industrial Footswitch

Industrial Footswitch with 6 Foot Cable Part number 300-50. High quality, industrial footswitch. Six foot cable length with standard two contact, 2.5mm (.098") diameter sub-miniature phone plug receptacle.  For use with...

Industrial Footswitch with RJ45 Cable

Industrial Footswitch with 6 Foot RJ45 Ethernet Type Cable High quality, industrial footswitch. Six foot cable length with standard 8-Pin RJ45 Ethernet style connector.  For use with Heidenhain QC Series Quadra-Chek or Metronics Gage-Chek...

Industrial Footswitch with 10' Cable

Industrial Footswitch with 10 Foot Cable High quality, industrial footswitch. Ten foot (3M) cable length with standard two contact, 2.5mm (.098") diameter sub-miniature phone plug receptacle.  For use with...

Industrial Footswitch with 15' Cable

Industrial Footswitch with 15 Foot Cable High quality, industrial footswitch. Special 15 foot (4.5 M) cable length with standard two contact, 2.5mm (.098") diameter sub-miniature phone plug receptacle.  For use with...

ASI Datamyte to Mitutoyo Adapter Cable; 6 ft

Mitutoyo Digimatic to ASI Datamyte Adapter Cable; 6 ft Adapts Mitutoyo gage to ASI DataMyte device This Advanced Systems and Designs - ASDQMS six foot adapter cable is for use with multiplexers manufactured by Applied Stats, ASI/DataMyte and DataMyte...

ASI Datamyte to Mitutoyo Adapter Cable; 3 ft

Mitutoyo Digimatic to ASI Datamyte Adapter Cable; 3 ft Adapts Mitutoyo gage to ASI DataMyte device This Advanced Systems and Designs - ASDQMS 3 foot adapter cable is for use with multiplexers manufactured by Applied Stats, ASI/DataMyte and DataMyte...

ASI Datamyte to Mitutoyo Adapter; 1 ft

Mitutoyo Digimatic to ASI Datamyte Adapter Cable; 1 ft Adapts Mitutoyo gage to ASI DataMyte device This Advanced Systems and Designs - ASDQMS adapter cable is for use with multiplexers manufactured by Applied Stats, ASI/DataMyte and DataMyte with the...

Industrial Footswitch with USB Output

Industrial Footswitch with USB Output; 6 Foot Length This footswitch will plug directly into the computer USB port and send a gage read command to our GageMux® when using your SPC software. Easy to use with our GageMux® USB. This Footswitch...

Special Handswitch 6 Ft cable with .140" diameter miniature phone plug

ASDQMS Industrial Handswitch with 6 ft. cable & Miniature Phone Plug Note: Special .140" diameter miniature phone plug Special applications. High quality, industrial handswitch. Six foot cable length with standard two contact, 3.6mm (.140")...

In-Line Hand Switch for Digimatic Output Gage Cables

This in-line hand switch is designed for use with digimatic gage cables that do not have a built-in send button. Also for use with our FlashCable® in place of a standard footswitch or handswitch. One end plugs into the...

External Power Supply 110V AC - USB & Keyboard GageMux

Replacement power adapter for the GageMux Interface. Works on GageMux USB models. *Works with GageMux USB (500-80-USB) and GageMux USB Keyboard (500-80-KB-USB) models, also when setting up a daisy-chain operation with 4 or 8-port GageMux.

RS-232 to USB 2 Male

The interface cable converts a 9-pin female RS-232 serial connection to USB. Drivers load automatically. One end is 9-pin (DB9) male and the other is USB 2.0 male.  Six foot cable length.