Sartorius Cubis MSA Series Precision Balance Digimatic Gage Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
We can create a Digimatic output interface cable for any Sartorius device. This FlashCable® gage interface is designed to change the output on the Sartorius Cubis MSA Series High Resolution Precision Balance to an output in Digimatic format. The 25-pin male connector on the Advanced Systems & Designs FlashCable® gage interface connects to the 25-Pin female connector on the Sartorius Cubis Precision Electronic Balance.
This FlashCable® gage interface is engineered to work with our GageMux® multiple-input gage interface or similar devices that recognize the Mitutoyo Digimatic signal. It does not obtain any power from the gage.
When connected to the GageMux® gage interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On Digimatic interfaces other than the GageMux®, pin 9 of the 10-pin connector needs to provide 5v DC power to the FlashCable® gage interface.
The LED on the FlashCable® gage interface will turn GREEN to indicate that the FlashCable® is connected properly. The LED flashes RED when the data is being sent or a data request is triggered. Six foot standard cable length with special lengths available on request.
The data transfer can be triggered using any of the following methods:
Using the Data Output button on the Sartorius Cubis MSA Series Precision Balance
Using our 300-1S in-line handswitch
Using a footswitch on the FlashCable® (not included)
Using the footswitch on the GageMux® USB or similar triggering method
Sending a gage read command from the computer to the gage
Six foot standard cable length. Lifetime warranty against manufacturing defects. A detailed operation manual is included with this FlashCable® gage interface.
Advanced Systems & Designs normally sets the FlashCable® gage interface to the default settings for the Sartorius Cubis MSA Series Precision Balance. To insure proper communication both the Sartorius Precision Balance and FlashCable® gage interface must be set to the same values. Refer to the Sartorius Cubis MSA Series User Manual for more information on external communication.
Digimatic output FlashCable® interface for Sartorius Cubis MSA Series Precision Balance
Sends data to GageMux® or other devices that recognize the Digimatic signal
Several options to trigger data
Special cable lengths available on request
Lifetime warranty against manufacturing defects