Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS FlashCable® for Mettler Toledo PG-S Precision Balance

Digimatic FlashCable® for Mettler Toledo PG-S Precision Balance

Usually ships in 5 days

Product Description

Mettler Toledo PG-S Precision Balance Digimatic Gage Interface

Send data to our GageMux® gage interface or other Digimatic input devices

This FlashCable® gage interface is a engineered to change the output on the Mettler Toledo PG-S Precision Balance to an output in a digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the 9-Pin female connector on the Mettler Toledo PG-S Series Precision Balance. 

Designed to work with our GageMux® universal gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.

The data transfer can be triggered using any of the following methods:

  • Using the data send button on the Mettler Toledo PG-S Series Precision Balance (if it has one)

  • Using our 300-1S in-line handswitch

  • Using a Footswitch on the FlashCable® (not included)

  • Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)

  • Sending a gage read command from the computer to the gage

A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® and the Mettler Toledo Precision Balance. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Mettler Toledo Precision Balance. Make sure both the Mettler Toledo PG-S Series Precision Balance and FlashCable® gage interface are set to the same values. Refer to the Mettler Toledo user manual for PG-S balances for more information on external communication. Use the GageMux® USB manual to see the reconfiguration instructions.

Six foot standard cable length with special lengths available upon request.


  • Digimatic output FlashCable® for Mettler Toledo PG-S Series Precision Balance

  • Sends data to GageMux® or devices that recognize the Digimatic Signal

  • Several options to trigger data

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!