Product Description
RADWAG PS Series Electronic Balance FlashCable® Digimatic Interface
Send data to our GageMux® gage interface or other Digimatic input devices
Advanced Systems and Designs can create a Digimatic output interface cable for all RADWAG balances and scales! This FlashCable® gage interface is engineered to convert the output on the RADWAG PS Series Electronic Balance to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the male connector on the RADWAG PS Series Electronic Balance.
This FlashCable® gage interface is designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the RADWAG PS Series Electronic Balance. When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®. Contact us for more information on how to confirm this requirement.
When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the PRINT / ENTER button on the RADWAG PS Series Electronic Balance
-
Using a Footswitch connected to our GageMux® USB or equivalent triggering methods
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Sending a read command from the external computer to the RADWAG PS Series Electronic Balance
A detailed operation manual is included with this FlashCable® gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable® gage interface to the default RS232 communication settings on the PS Series Electronic Balance. The RADWAG PS Series Electronic Balance and FlashCable® gage interface must be set to the same communication values. Refer to the RADWAG PS Series Electronic Balance user manual for more information on external communication and connecting to a peripheral device.
Lifetime warranty against manufacturing defects. Six foot standard cable length with special lengths available upon request. Contact us for special cable length requirements.
Details:
-
Digimatic output FlashCable® for RADWAG PS Series Electronic Balance
-
Sends data to GageMux® gage interface or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
