Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS Customer Length FlashCable® for Mitutoyo QM-Data 200 Display

Digimatic FlashCable® for Mitutoyo QM-Data 200 Display - 10 foot

Usually ships in 5 days

Product Description

Mitutoyo QM-Data 200 Display Digimatic Interface Cable - Custom 10 ft. Length

Send data to our GageMux® gage interface or other Digimatic input devices

This FlashCable® gage interface is engineered to convert the output on the Mitutoyo QM-Data 200 Display to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the RS-232C male interface connector on the Mitutoyo QM-Data 200 Display.

This FlashCable® gage interface is designed to work with our GageMux® multiple input gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the Mitutoyo Digital Display. When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®.

When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.

For our standard six foot length Mitutoyo QM-Data 200 Display Digimatic Interface Cable see our part number 600-22-QM200-MTI

The data transfer can be triggered by the following method:

  • Using the enter / send data button on the Mitutoyo QM-Data 200 Display

A detailed operation manual is included with this FlashCable® gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable® gage interface to the default RS-232 communication settings on the Mitutoyo QM-Data 200 Display. The QM-Data 200 Display and FlashCable® gage interface must be set to the same RS-232 communication values. Refer to the Mitutoyo QM-Data 200 Display hardware guide user manual for more information on how to set-up external communication using the RS-232C interface.

Lifetime warranty against manufacturing defects. This FlashCable® gage interface comes in a customer ten foot standard cable length. Additional lengths are available upon request. Contact us for more information.


  • Digimatic output FlashCable® interface cable for the Mitutoyo QM-Data 200 Display

  • Uses the enter / send data button on the Mitutoyo QM-Data 200 Display to send data

  • Sends data to GageMux® gage interface or other devices that recognize the Digimatic signal

  • Special ten foot cable length

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!