Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS FlashCable® for Mahr Millimar C1208 Display

Digimatic FlashCable® for Mahr Millimar C1208 / C1216 Display

Usually ships in 5 days

Product Description

Mahr Millimar C1208 / C1216 Digimatic Gage Cable Interface

Send data to our GageMux® gage interface or other Digimatic input devices

This FlashCable® gage interface is engineered to convert the output on the Mahr Millimar C1208 / S1216 Display to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the male connector on the Mahr Millimar Display.

This FlashCable® gage interface is designed to work with our GageMux® gage interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the Mahr Digimar 817 CLM Quick Height Display.

When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®. Contact us for more information on this requirement. When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.

To send data directly to Excel or other Internet Explorer programs using a single gage cable, see our 600-22-C1208-KB-USB SmartCable Keyboard.

The data transfer can be triggered by the following method:

  • Pressing the DATA key on the Mahr Millimar C1208 / C1216 Display

  • Pressing a footswitch connected to our GageMux® or similar Digimatic device

  • Depressing a connected footswitch (not included)

A detailed operation manual is included with this FlashCable® gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable® gage interface to the default RS232 communication settings on the Mahr Millimar C1208 / C1216 Display. The Mahr Millimar Display and FlashCable® gage interface must be set to the same RS232 communication values. Refer to the Mahr Millimar C1208 / C1216 operating instructions for more information on how to set-up external communication using the RS-232C interface.

This FlashCable® gage interface comes in a six foot standard cable length. Special lengths are available upon request. Lifetime warranty against manufacturing defects.


  • Digimatic output FlashCable® interface cable for the Mahr Millimar C1208 / C1216 Display

  • Sends data to our GageMux® gage interface or other devices that recognize the Digimatic Signal

  • Multiple options for transferring data from the Mahr Millimar Display

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!