Product Description
AGR MBT7400 Portable Thickness Measuring Device Digimatic FlashCable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to change the output on the AGR MBT7400 Portable Thickness Measuring Device to an output in a Digimatic format. Designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The high quality 7-pin connector on this Advanced Systems & Designs FlashCable® gage interface connects to the AGR Portable Thickness Measuring Device.
The FlashCable® does not obtain any power from the gage. Pin 9 of the 10-pin input port on the GageMux® gage interface provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable®.
When the FlashCable® is connected to the GageMux® gage interface, the LED on the FlashCable® turns GREEN. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the Print button on the AGR MBT7400 Portable Thickness Measuring Device
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a gage read command from the computer to the AGR MBT7400 Portable Thickness Measuring Device
An operating manual is included with this FlashCable® gage interface. We typically set the FlashCable® gage interface to the default settings on the AGR MBT7400 Portable Thickness Measuring Device. Make sure both the AGR MBT7400 Portable Thickness Measuring Device and FlashCable® gage interface are set to the same values. Refer to the AGR Portable Thickness Measuring Device technical manual / operating instructions for more information on external communication. Refer to the GageMux® USB gage interface manual to see the reconfiguration instructions.
Six foot standard cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® for AGR MBT7400 Portable Thickness Measuring Device
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Offers several options to send data from the device
-
Special cable lengths available on request. Contct us with your requests.
-
Lifetime warranty against manufacturing defects
