Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS Digimatic FlashCable® for Keyence LJ-G High-accuracy 2D Laser Displacement Sensor

FlashCable® Interface for Keyence LJ-G Series Laser Displacement Sensor

Usually ships in 5 days

Product Description

FlashCable® for Keyence LJ-G Series High-Accuracy 2D Laser Displacement Sensor

Sends data to our GageMux® gage interface

Using a Keyence RJ Ethernet type male cable connector, this Advanced Systems and Designs FlashCable® gage interface changes the output on the Keyence LJ-G Series High-Accuracy 2D Laser Displacement Sensor to an output in a Mitutoyo Digimatic format. This interface cable is engineered to work with our GageMux® gage interface or data acquisition systems that recognize the Mitutoyo Digimatic signal.

The FlashCable® gage interface does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices other than the GageMux® multiple input gage interface, make sure pin 9 on the connector provides a 5vDC power supply to the FlashCable® gage interface cable. Contact us for information on how to test for this function.

The LED on the FlashCable® gage interface is solid GREEN when power is properly provided to the interface cable. The LED briefly flashes RED when data is send from the Keyence LJ-G Series High-Accuracy 2D Laser Displacement Sensor to the GageMux® gage interface.

The data transfer can be triggered using any of the following methods:

A user operation manual is included with this FlashCable® gage interface. Advanced Systems & Designs normally sets the FlashCable® gage interface at the factory to the default settings on the Keyence High-Accuracy Laser Displacement Sensor. Both the Keyence High-Accuracy Laser Displacement Sensor and FlashCable® gage interface must be set to the same values in order for proper communication to occur. Refer to the Keyence LJ-G Series user manual for more information on external communication.

Six foot standard cable length. All of our FlashCable® gage interfaces are available in custom lengths, on request.


  • Digimatic output FlashCable® for Keyence LJ-G Series High-Accuracy 2D Laser Displacement Sensor

  • Sends data to GageMux® or devices that recognize the Digimatic output signal

  • Several options to trigger data

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!