Product Description
Sartorius TE2101 Scale FlashCable® Gage Interface
Sends SPC data to our GageMux USB
This FlashCable® gage interface is engineered to change the output on the Sartorius TE2101 Scale to an output in a digimatic format. The special 25-Pin male connector on the Advanced Systems & Designs FlashCable® gage interface connects directly to the 25-Pin female connector on the Sartorius TE2101 Scale.
This FlashCable® gage interface is designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable®. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
- Using the data send button on the Sartorius TE2101 Scale, if it has one
- Using our 300-1S in-line handswitch
- Using a Footswitch on the FlashCable® (not included)
- Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices
- Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® and the Sartorius TE2101 Scale. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Sartorius TE2101 Scale. Make sure both the TE2101 Scale and FlashCable® are set to the same values. Refer to the Sartorius TE2101 Scale user manual for more information on external communication.
Six foot cable length. All of our FlashCable® gage interfaces are available in custom lengths. Contact us for more information.
Features:
-
Digimatic output FlashCable® gage interface for the Sartorius TE2101 Scale
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
