Product Description
Sartorius GP | GPA | GCA Series Precision Balance FlashCable® Gage Interface
Send data to our GageMux® gage interface or other Digimatic input devices
The Sartorius Gem Plus is known for a 0.01 gram readability and because of its accuracy, was designed with a focus on the gold jewelry marketplace. This FlashCable® gage interface is designed to change the output on the Sartorius GP Series (Gem Plus) Precision Balance to an output in Digimatic format. The male connector on the Advanced Systems & Designs FlashCable® gage interface connects to the 25-Pin female connector on the Sartorius Gem Plus Precision Balance.
This FlashCable® gage interface is engineered to work with our GageMux® multiple-input gage interface or similar devices that recognize the Mitutoyo Digimatic signal. It does not obtain any power from the gage.
When connected to the GageMux® gage interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On Digimatic interfaces other than the GageMux®, pin 9 of the 10-pin connector needs to provide 5v DC power to the FlashCable® gage interface.
The LED on the FlashCable® gage interface will turn GREEN to indicate that the FlashCable® is connected properly. The LED flashes RED when the data is being sent or a data request is triggered. Six foot standard cable length with special lengths available on request.
The data transfer can be triggered using any of the following methods:
-
Using the Data Output button on the Sartorius Gem Plus Series Precision Balance
-
Using our 300-1S in-line handswitch
-
Using a footswitch on the FlashCable® (not included)
-
Using the footswitch on the GageMux® USB or similar triggering method
-
Sending a gage read command from the computer to the gage
Lifetime warranty against manufacturing defects. A detailed operation manual is included with this FlashCable® gage interface.
Advanced Systems & Designs normally sets the FlashCable® gage interface at the factory to the default settings for the Sartorius Precision Balance. To insure proper communication both the Sartorius Gem Plus Precision Balance and FlashCable® gage interface must be set to the same values. Refer to the Sartorius Gem Plus Precision Balance operating instructions for more information on external communication.
Details:
-
Digimatic output FlashCable® interface for Sartorius Gem Plus Series Precision Balance
-
Sends data to GageMux® or other devices that recognize the Digimatic signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
