Product Description
FlashCable® Gage Interface for Asimeto Digital Caliper
Sends data to our GageMux® gage interface
This FlashCable® is designed to change the output on the Asimeto Absolute 307-56-0 Digital Caliper to an output in a Mitutoyo Digimatic format. This FlashCable® interface cable is designed to work with our GageMux® or other data acquisition systems that recognize the Mitutoyo Digimatic signal. The FlashCable® gage interface does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable®. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to the FlashCable® gage interface.
The data transfer can be triggered using any of the following methods:
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices
-
Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable® gage interface. Click the following link to see our 600-127-KB-USB SmartCable™ Keyboard gage interface to send data directly to Excel or other spreadsheet programs from this Asimeto caliper.
Six foot standard cable length. Special lengths readily available upon request.
Details:
-
Digimatic output FlashCable® for the Asimeto Absolute Digital Caliper
-
Sends data to GageMux® gage interface or devices that recognize the Digimatic signal
-
Several options to trigger data
-
Special cable lengths available on request. Contct us form more information
-
Lifetime warranty against manufacturing defects
