Product Description
Mark 10 Programmable Test Stand Digimatic FlashCable® Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to convert the output on the Mark 10 Programmable Test Stand to an output in a Mitutoyo Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable® gage interface cable connects directly to the male connector on the Mark 10 Programmable Test Stand.
This gage interface cable is engineered and designed to work with our GageMux® multiple input gage interface or comparable devices that recognize the Mitutoyo Digimatic signal. The FlashCable® interface does not obtain any power from the Mark 10 Test Stand. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices other than our GageMux® gage interface, ensure that pin 9 on the input connector provides 5v DC power to the FlashCable® interface.
When the FlashCable® is properly connected to the GageMux®, the LED on the FlashCable® will turn GREEN. The LED briefly flashes RED when a data request is triggered using the following methods.
The data transfer can be triggered using any of the following methods:
-
Using the data key on the Mark 10 Programmable Test Stand
-
Using our 300-1S in-line handswitch
-
Using a Footswitch attached to the FlashCable® (not included)
-
Using our Footswitch on the GageMux® USB or equivalent triggering method
-
Sending a gage read command from the computer to the Mark 10 Programmable Test Stand
A detailed operation manual is included with this FlashCable® gage interface. We typically set the FlashCable® gage interface cable to the default settings on the Mark 10 Programmable Test Stand. Both the Mark 10 Programmable Test Stand and FlashCable® gage interface must be set to the same values in order to properly send and receive data. Refer to the Mark 10 Programmable Test Stand user guide for more information on external communication.
Six foot standard cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® interface for Mark 10 Programmable Test Stand
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
