Heidenhain QC1000 Quick-Chek Display FlashCable® Gage Interface
Sends data to our GageMux® or similar devices
The Quick-Chek QC-1000 displays measurements corresponding to the movement of the encoders. Through the use of our FlashCable® gage interface and GageMux® USB, the RS-232 serial port on the Quick-Chek QC-1000 allows two-way communication between an external computer and the Quick-Chek QC-1000 readout.
The FlashCable® gage interface is engineered to change the output on the Heidenhain QC1000 Quick-Chek Digital Display to an output in Digimatic format. The male connector on the Advanced Systems & Designs FlashCable® gage interface connects directly to the 9-pin female connector on the Heidenhain QC1000 Digital Display.
This FlashCable® Digimatic gage interface is designed to work with our GageMux® or other similar devices that recognize the Mitutoyo Digimatic signal. When connected to the GageMux®, the input port provides the power to the FlashCable® gage interface. When using devices other than the GageMux® please insure that pin 9 of the 10-pin connector provides a 5v DC supply to the FlashCable® gage interface. The LED on the FlashCable® gage interface turns GREEN when it is connected properly. The LED turns RED when the data is being sent or a data request is requested.
The data transfer can be triggered using any of the following methods:
- Using the print button on the QC1000 Quick-Chek Display
- Using our 300-1S in-line handswitch
- Using a Footswitch on the FlashCable® (not included)
- Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices
- Sending a gage read command from the computer to the Heidenhain QC1000, such as X, to send X axis data.
A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® gage interface and the Heidenhain QC1000 Quick-Chek Digital Display. The FlashCable® gage interface is normally set to the to the default settings on the Heidenhain QC1000 Quick-Chek Digital Display. Both the Heidenhain QC1000 and FlashCable® gage interface must be set to same values. Refer to the Heidenhain QC1000 Quick-Chek operation manual for more information on RS232 serial communication.
This Advanced Systems & Designs FlashCable® gage interface has a lifetime warranty against manufacturing defects. Six foot standard length with special lengths available upon request.
Digimatic output FlashCable® for Heidenhain QC1000 Quick-Chek Digital Display
Sends data to GageMux® or devices that recognize the Digimatic Signal
Several options to trigger data
Special FlashCable® gage interface cable lengths are available on request
Lifetime warranty against manufacturing defects