Product Description
Adam Equipment PMB Moisture Analyzer FlashCable® Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
Using the male RS-232C serial interface connector on the Adam Equipment PMB Moisture Analyzer you are able to send data through this FlashCable® and our GageMux® USB interface to your data collection software program. This FlashCable® gage interface is engineered to change the output on the Adam Equipment PMB Moisture Analyzer to an output in a Mitutoyo Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable® Digimatic gage interface connects to the RS232C serial interface male connector on the Adam Equipment PMB Moisture Analyzer.
This FlashCable® gage interface is designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux® pin 9 of the input connector must provide 5v DC power supply to the FlashCable® gage interface.
The LED on the FlashCable® interface will turn GREEN to indicate that the FlashCable® gage interface is connected properly. The LED briefly flashes RED when the data is being sent or a data request is triggered using the following.
The data transfer can be triggered using any of the following methods:
-
Using the PRINT key on the Adam Equipment PMB Moisture Analyzer
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a device read command from the host computer
An operation manual is included with this FlashCable® gage interface. Advanced Systems & Designs sets the FlashCable® at the factory to the default RS232 communication settings on the Adam Equipment PMB Moisture Analyzer. Refer to the Adam Equipment PMB Moisture Analyzer operation manual for more information on external communication with peripheral devices.
Lifetime warranty against manufacturing defects. Six foot standard interface cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Adam Equipment PMB Moisture Analyzer
-
Sends data to our GageMux® or other devices that recognize the Digimatic signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
