Product Description
Ohaus AX Series Precision Balance Digimatic FlashCable® Interface
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface will change the output on the Ohaus AX Series Adventure Precision Balance to an output in a Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the female connector on the Ohaus AX Series Precision Balance.
Our FlashCable® gage interface is designed to work with our GageMux® gage interface and similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® gage interface receives power from the GageMux® gage interface. When using a multiple input gage interface device other than the GageMux® make sure pin 9 of the 10-pin connector provides a 5v DC supply to the FlashCable® interface cable. The LED on the FlashCable® turns GREEN when it is properly connected and powered. The LED will briefly turn RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the data send button on the Ohaus AX Series Adventure Precision Balance
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a read command from the computer to the Ohaus AX Series Precision Balance
This FlashCable® gage interface includes a detailed operation manual. Advanced Systems & Designs normally sets the FlashCable® gage interface to the default settings on the Ohaus Adventure Precision Balance. The Ohaus AX Series Precision Balance and FlashCable® gage interface must be set to the same RS232 communication values. Refer to the Ohaus AX Series Adventure Precision Balance instruction manual for more information on RS232 communication.
This FlashCable® gage interface comes in a standard six foot cable length. However special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Ohaus AX Series Adventure Precision Balance
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
