Product Description
LW Measurements HRB Scale Digimatic FlashCable® Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface cable is engineered to change the output on the LW Measurements HRB Series High Resolution Electronic Balance to an output in Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable® connects directly to the male connector on the LW Measurements HRB Series Electronic Balance.
This FlashCable® gage interface is designed to work with our GageMux® multiple-input interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the LW Measurements HRB Series Electronic Balance.
When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. When using interface devices other than the GageMux® USB gage interface, pin 9 of the 10-pin connector must provide a 5V DC supply to the FlashCable® gage interface. The LED on the FlashCable® turns GREEN when the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered by the following method:
-
Pressing the PRINT key on the LW Measurements HRB Electronic Balance
Every FlashCable® gage interface includes a detailed operation manual. The communication parameters are set to meet the requirements for both the FlashCable® gage interface and the LW Measurements HRB Series High Resolution Electronic Balance. For communication to occur both the LW Measurements HRB Series Electronic Balance and FlashCable® interface cable must be set to the same values. Please refer to the LW Measurements HRB Series High Resolution Electronic Balance operating manual for more information on external RS232 communication.
Six-foot standard cable length with special lengths available upon request. Contact us for more information. Lifetime warranty against manufacturing defects.
Details:
-
Digimatic output FlashCable® for LW Measurements HRB Series High Resolution Electronic Balance
-
Sends data to GageMux® gage interface or other devices that recognize the Digimatic signal
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
