Intelligent Weighing Technology PB Series Balance Digimatic Output Interface Cable
Send data to our GageMux® gage interface or other Digimatic devices
This FlashCable® gage interface is designed to change the output on the Intelligent Weighing Technology PB Series Balance to an output in Mitutoyo Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® gage interface connects to the 9-Pin female connector on the Intelligent Weighing Technology Balance.
This FlashCable® gage interface is engineered to work with our GageMux® multiple-input gage interface or similar devices that recognize the Mitutoyo Digimatic signal. It does not obtain any power from the PB Series Balance. When connected to the GageMux® gage interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On Digimatic interfaces other than our GageMux®, pin 9 of the 10-pin connector needs to provide 5vDC power to the FlashCable® interface.
The LED on the FlashCable® gage interface will turn GREEN to indicate that the FlashCable® is connected properly to the Intelligent Weighing Technology PB Series Balance. The LED flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
Using the PRINT key on the Intelligent Weighing Technology PB Series Balance
Using our 300-1S in-line handswitch
Using a footswitch on the FlashCable® (not included)
Using the footswitch on the GageMux® USB or similar triggering method
Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable® gage interface. Lifetime warranty against manufacturing defects. Six foot standard cable lengths---special lengths are available upon request.
Advanced Systems & Designs normally sets the FlashCable® gage interface to the default settings for the Intelligent Weighing Technology PB Series Balance. To insure proper communication both the IWT PB Series Balance and FlashCable® gage interface must be set to the same values. Refer to the Intelligent Weighing Technology PB Series Balance operation manual for more information on interface communication with peripheral devices.
Digimatic output FlashCable® interface for Intelligent Weighing Technology PB Series Balance
Sends data to GageMux® or other devices that recognize the Digimatic signal
Several options to trigger data
Special cable lengths available on request
Lifetime warranty against manufacturing defects