Loading... Please wait...

CALL TOLL FREE 800-939-9934

-->

Blog - Mitutoyo 500 Series

SmartCable™ USB for Mitutoyo Gages with 10-pin Plain Connector

Posted by

Advanced Systems and Designs – ASDQMS produces a 600-440-USB SmartCable™ which allows your Mitutoyo gage with a 10-pin Plain Connector to send measurement data to your SPC data collection software program. Applicable Mitutoyo gages are some Laser Scan Micrometers, MU-checkers and other gages which have the 10-Pin flat connector. The output of the SmartCable™ USB gage interface is a standard USB 2.0 COM port signal and the USB connection provides power to the interface.

Readings can be triggered by pressing the button on the SmartCable™ USB gage interface, by depressing a connected footswitch, by pressing a data send button on the gage, if it has one, or by sending a gage read command from the external computer to the SmartCable™ USB gage interface. This SmartCable™ USB gage interface can send data in read only, continuous, continuous with delay, disabled pushbutton with request command, and other modes.

The SmartCable™ USB gage interface will NOT send data directly to a spreadsheet program such as Excel without using a separate software wedge. Check out our SmartCable™ Keyboard (600-440-KB-USB) gage interface if you want to send data directly to Excel without using complicated software wedges.

The 600-440-USB SmartCable™ makes your job simpler!

Click this LINK for more information

SmartCable™ USB for Mitutoyo 500 Series Indicator Gages

With the Advanced Systems and Designs 600-390-USB SmartCable™ gage interface, you can connect your Mitutoyo 500 Series digital indicator to a USB port on the computer and send inspection data to SPC software programs.The USB connection provides power to the interface.This SmartCable allows you to send a gage read command from the external computer or your SPC software. [...]

Read More »


SmartCable™ USB for Mitutoyo 500 Series Caliper Gage; Data Out Switch

The Advanced Systems and Designs 600-520-USB SmartCable™ allows you to easily send measurement data from your Mitutoyo 500 Series Caliper to SPC data collection software programs.The Mitutoyo 500 Series Gage is connected to the SmartCable™ USB gage interface using the standard Mitutoyo gage connector. The SmartCable™ USB gage interface will connect the Mitutoyo 500 Series ABSOLUTE Caliper Gage to the [...]

Read More »