Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS FlashCable® for Ohaus Adventurer Precision Balance

FlashCable® for Ohaus AR Series Adventurer Precision Balance

Usually ships in 5 days

Product Description

Ohaus AR Series Precision Balance Digimatic FlashCable® Interface

Send data to our GageMux® gage interface or other Digimatic input devices

This FlashCable® gage interface will change the output on the Ohaus AR Series Adventurer Precision Balance to an output in a Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable® connects directly to the male connector on the Ohaus AR Series Precision Balance. 

Our FlashCable® gage interface is designed to work with our GageMux® gage interface and similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® gage interface receives power from the GageMux® gage interface. When using a multiple input gage interface device other than the GageMux® make sure pin 9 of the 10-pin connector provides a 5v DC supply to the FlashCable® interface cable. The LED on the FlashCable® turns GREEN when it is properly connected and powered. The LED will briefly turn RED when the data is being sent or a data request is triggered.

The data transfer can be triggered using any of the following methods:

  • Using the data send button on the Ohaus AR Series Adventurer Precision Balance

  • Using our 300-1S in-line handswitch

  • Using a Footswitch on the FlashCable® (not included)

  • Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)

  • Sending a read command from the computer to the Ohaus AR Series Precision Balance

This FlashCable® gage interface includes a detailed operation manual. Advanced Systems & Designs normally sets the FlashCable® gage interface to the default settings on the Ohaus Adventurer Precision Balance. The Ohaus AR Series Precision Balance and FlashCable® gage interface must be set to the same RS232 communication values. Refer to the Ohaus AR Series Adventurer Precision Balance instruction manual for more information on RS232 communication. 

This FlashCable® gage interface comes in a standard six foot cable length. However special lengths available upon request.


  • Digimatic output FlashCable® for Ohaus AR Series Adventurer Precision Balance

  • Sends data to GageMux® or devices that recognize the Digimatic Signal

  • Several options to trigger data

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!