The Advanced Systems and Design ASDQMS FlashCable® gage interface will change the output on the Ohaus TS Series Precision Standard Balance to an output in a Digimatic format. The 9-pin female connector on the FlashCable® will connect directly to the male connector on the Ohaus TS Precision Balance.

Our FlashCable® gage interface is designed to work with our GageMux® gage interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® gage interface receives power from the GageMux® gage interface. The LED on the FlashCable® turns GREEN when it is properly connected and powered. The LED will briefly turn RED when the data is being sent or a data request is triggered.

The data transfer can be triggered by using the data send button on the Ohaus TS Series Precision Standard Balance, using our 300-1S in-line handswitch, using a footswitch or by sending a read command from the computer to the Ohaus TS Series Precision Balance.

Click this LINK for more information.