Loading... Please wait...

CALL TOLL FREE 800-939-9934

-->
  • ASDQMS FlashCable® for Mitutoyo LH-600E/EG Height Gage Display

Digimatic FlashCable® for Mitutoyo LH-600E/EG Height Gage Display

Price:
$169.00
SKU:
600-22-LH600-MTI
Availability:
Usually ships in 5 days
Quantity:

Product Description

Mitutoyo LH-600E/EG Height Gage Digimatic Interface Cable

Send data to our GageMux® gage interface or other Digimatic input devices

This FlashCable® gage interface is engineered to convert the output on the Mitutoyo LH-600E/EG Height Gage Display to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the RS-232C male connector on the Mitutoyo LH-600E/EG Height Gage Display.

This FlashCable® gage interface is designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the Mitutoyo LH-600E/EG Height Gage. When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®.

When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.

The data transfer can be triggered by the following method:

  • Using the enter / send data button on the Mitutoyo LH-600E/EG Height Gage Display

A detailed operation manual is included with this FlashCable® gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable® gage interface to the default RS232 communication settings on the Mitutoyo LH-600E/EG Display. The Mitutoyo LH-600E/EG Height Gage and FlashCable® gage interface must be set to the same RS232 communication values. Refer to the Mitutoyo LH-600E/EG Height Gage Display user manual for more information on how to set-up external communication using the RS-232C interface.

This FlashCable® gage interface comes in a six foot standard cable length. Special lengths are available upon request.

Details:

  • Digimatic output FlashCable® interface cable for the Mitutoyo LH-600E/EG Height Gage Display

  • Sends data to GageMux® gage interface or other devices that recognize the Digimatic Signal

  • Uses the enter / send data button on the Mitutoyo LH-600E/EG Display to send data

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects


write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!