Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS SmartCable USB with Keyboard Output for A&D MC Series Mass Comparator Balance

SmartCable™ Keyboard for A&D MC Series Mass Comparator Balance

Usually ships in 5 days

Product Description

SmartCable™ Interface Cable for A&D MC Series Mass Comparator Balance

Send data directly to Excel---No Software Wedge Required

This Advanced Systems & Designs - ASDQMS SmartCable™ USB Keyboard single gage interface connects the A&D MC Series Mass Comparator Balance to a computer. Attaches the A&D MC Series Mass Comparator Balance to the SmartCable Keyboard gage interface using a 25-pin male cable connector---no additional cables required. The output of the ASDQMS SmartCable Keyboard is a standard USB 2.0 keyboard signal.

Connecting the ASDQMS SmartCable USB Keyboard gage interface with its built-in keyboard wedge to a computer will allow the A&D MC Series Mass Comparator Balance to be identified as a keyboard device that can send data to any Microsoft Windows application - no software wedge required. This SmartCable Keyboard will make the A&D MC Series Mass Comparator Balance readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet, simply select the cell where you want the data to appear and trigger a reading.

Readings can be triggered by the following:

  • Pressing a ENTER key on the A&D MC Series Mass Comparator Balance

  • Pressing the button on the ASDQMS SmartCable™ Keyboard gage interface

  • Depressing a connected footswitch (not included)

A detailed operation manual is included with this Advanced Systems and Designs SmartCable Keyboard gage interface. At the factory, Advanced Systems & Designs normally sets the SmartCable Keyboard to the default settings on the A&D MC Series Mass Comparator Balance. Make sure both the SmartCable and A&D Mass Comparator Balance are set to the same values. Refer to the A&D MC Series Mass Comparator Balance instruction manual for more information on connecting the serial interface to a computer.

LED Indicator lights aid the user with the operation of the SmartCable Keyboard gage interface. This ASDQMS SmartCable Keyboard gage interface is easily configured to output data in different output modes on your spreadsheet, such as CR, TAB, up, down, left, or right. The output mode is selected by adjusting the rotary switch on the SmartCable Keyboard. To access the rotary switch, simply remove the top cover by loosening two Phillips screws.

Six foot standard cable length. Special lengths are available upon request.


  • ASDQMS SmartCable™ Keyboard gage interface for A&D MC Series Mass Comparator Balance

  • Sends data to Excel or other Explorer based SPC programs

  • Multiple data triggering options

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!