Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS SmartCable™ Keyboard for Mark-10 TT01 Digital Torque Tester

SmartCable™ Keyboard for Mark-10 Series TT01 Torque Tester

Usually ships in 5 days

Product Description

Mark-10 Series TT01 Digital Cap Torque Tester SmartCable™ Interface

Send data directly to Excel---No Software Wedge Required

The Mark-10 Series TT01 Digital Cap Torque Tester is designed to measure bottle cap application and removal torque. This Advanced Systems & Designs SmartCable™ USB Keyboard, single gage interface connects the Mark-10 Series TT01 Digital Cap Torque Tester to a computer. Attaches the Mark-10 Digital Cap Torque Tester to the SmartCable™ Keyboard using a 15-pin HD male cable connector---no additional cables required. The output of the SmartCable™ Keyboard is a standard USB 2.0 keyboard signal.

Connecting the SmartCable™ Keyboard with its built-in keyboard wedge will allow the Mark-10 Series TT01 Digital Cap Torque Tester to be identified as a keyboard device that can send data to any Microsoft Windows application - no complicated software wedge required. The SmartCable™ Keyboard gage interface will make the Mark-10 Digital Cap Torque Tester digital readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet or Explorer based SPC programs, simply select the cell where you want the data to appear and trigger the reading.

Readings can be triggered by the following:

  • Pressing the DATA button on the Mark-10 Series TT01 Digital Cap Torque Tester

  • Pressing the pushbutton on the SmartCable™ Keyboard gage interface

  • Depressing a connected footswitch (not included)

Simple to use!

LED Indicator lights aid the user with the operation of the SmartCable™ gage interface.  This SmartCable™ Keyboard is easily configured to output data in different output modes on your spreadsheet, such as CR, TAB, up, down, left, or right. The output mode is selected by adjusting the rotary switch on the SmartCable™ Keyboard gage interface. To access the rotary switch, simply remove the top cover by loosening two Phillips screws.

Six foot standard cable length. Special lengths are available on request.

A detailed operation manual is included with this SmartCable™ Keyboard gage interface. Advanced Systems & Designs normally sets the SmartCable™ Keyboard to the default settings on the Mark-10 Series TT01 Digital Cap Torque Tester. Make sure both the SmartCable™ gage interface and Mark-10 Digital Cap Torque Tester are set to the same values. Refer to the Mark-10 Series TT01 Digital Cap Torque Tester user guide for more information on peripheral communication.


  • SmartCable™ Keyboard gage interface for Mark-10 Series TT01 Digital Cap Torque Tester

  • Sends data to Excel or other Explorer based SPC programs

  • Multiple data triggering options

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!