Loading... Please wait...

CALL TOLL FREE 800-939-9934

  • ASDQMS FlashCable® for Mettler Toledo SB Series Precision Balance

Digimatic FlashCable® for Mettler Toledo SB Precision Balance

Usually ships in 5 days

Product Description

Mettler Toledo SB Series Precision Balance Digimatic Gage Interface Cable

Send data to our GageMux® gage interface or other Digimatic input devices

This FlashCable® gage interface is engineered to change the output on the Mettler Toledo SB Precision Balance to an output in a Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the 9-Pin female connector on the Mettler Toledo Precision Balance. 

Designed to work with our GageMux® universal gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. This FlashCable® gage interface does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 on the connector provides 5vDC power to the FlashCable®.

When the FlashCable® gage interface is connected to the GageMux®, the LED on the FlashCable® turns GREEN which indicates that the FlashCable® interface is connected properly. The LED turns RED when the data is being sent or a data request is triggered.

The data transfer can be triggered using any of the following methods:

  • Using the print / transmit data button on the Mettler Toledo SB Precision Balance

  • Using our 300-1S in-line handswitch

  • Using a Footswitch on the FlashCable® (not included)

  • Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)

  • Sending a gage read command from the computer to the Mettler Toledo Balance

A detailed operation manual is included with this FlashCable® gage interface. At the factory, Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Mettler Toledo SB Series Precision Balance. Make sure both the Mettler Toledo Precision Balance and FlashCable® gage interface are set to the same values. Refer to the operating instructions on the Mettler Toledo SB Series Precision Balance for more information on external communication.

Six foot standard cable length with special lengths available upon request.


  • Digimatic output FlashCable® for Mettler Toledo SB Precision Balance

  • Sends data to GageMux® or devices that recognize the Digimatic Signal

  • Provides several options to trigger data

  • Special cable lengths available on request

  • Lifetime warranty against manufacturing defects

write a review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!